Before you start
Charge the probe, confirm your display is compatible, and install the app specified for your supplied model before connecting.
Connect your probe.
Open the app.
Follow the shared connection workflow for the Visfero range, with real frames from a supplier iPad demonstration.
Shown on iPad with WirelessUSG.Z 3.6.52. App names, screens and permission prompts can differ on other platforms and versions.
Full iPad walkthrough · no audio
Watch the connection steps
Watch the complete iPad workflow: connect in WLAN settings, open WirelessUSG.Z, confirm Join, then use LIVE and Freeze.
-
Open Wi-Fi and connect
Power on the charged probe. In Wi-Fi / WLAN settings, select the network identified on your probe or in its supplied instructions. Check for the connection checkmark.
Open full-size screenshot
-
Open the app. Confirm Join.
Launch the matching app. If prompted as in this iPad example, confirm Join for your probe’s network.
Open full-size screenshot
-
Check LIVE. Freeze to review.
The LIVE indicator confirms the app is receiving a scanning view. Use Freeze to pause before reviewing and saving through your app’s controls.
Open full-size screenshot
A connection guide, not clinical training. Follow the complete instructions supplied with your scanner. The preview image is not evidence of diagnostic performance.
Keep the connection workflow simple.
If LIVE does not appear
Check that Wi-Fi is enabled and your display remains connected to the probe’s network. Reopen the matching app and follow its supplied troubleshooting instructions.
Review and save
Freeze pauses the live view. Use the app’s image or video save controls, then follow your platform’s instructions to find or export the files. Storage paths differ between platforms.